Installing Multiple Airconds? Here’s How to Plan It in Malaysia
Introduction
Installing multiple airconds in a Malaysian home or business is a bigger task than many people expect. When you have two, three, or even more units being installed together, the process becomes more complex than a standard single-unit installation. You need to think about electrical load, breaker capacity, drainage planning, piping routes, placement of both indoor and outdoor units, and compliance with condo or building management rules if you live in a high-rise. Whether you’re cooling several bedrooms, an entire office, or a multi-story home, planning ahead is crucial to avoid headaches later.
In Malaysia’s hot climate, it’s common for families to install several airconds at once—especially when renovating, moving into a new home, or upgrading to energy-efficient inverter units. The challenge is ensuring everything works seamlessly together. A rushed or poorly planned installation can lead to circuit overload, noisy outdoor areas, messy piping, limited access for future servicing, and extremely high electricity usage.
This guide breaks down everything you need to consider when planning multiple aircond installations in Malaysia. From choosing the right layout to coordinating with your installer, preparing the electrical system, and ensuring long-term efficiency, each step plays a major role in how well your cooling system works for years to come. Companies like JB Cool Care specialize in handling multiple-unit installations and can guide homeowners through the entire process. Let’s explore the essential planning steps in detail.
Assess the Cooling Needs of Each Room
When installing multiple airconds, the first step is evaluating the cooling needs of every room individually. Not all rooms require the same horsepower (HP), and choosing the wrong size can drastically impact cooling efficiency and electricity consumption. A small room like a guest bedroom may need only a 1.0HP unit, while a master bedroom or living room might require 1.5HP or 2.0HP depending on size and sunlight exposure.
Start by measuring each room. The general rule in Malaysia is that larger rooms, rooms with high ceilings, or rooms exposed to afternoon sun need stronger cooling capacity. Rooms with many windows might also require additional cooling power. A professional installer such as JB Cool Care can calculate the exact capacity needed for each space based on room dimensions, insulation quality, heat load, and usage patterns.
You should also consider how often each room is used. A rarely used guest room may not need an expensive inverter model, while bedrooms that run nightly could benefit from energy-saving inverter airconds. Installing the correct capacity ensures faster cooling, longer unit lifespan, and lower electricity bills. If rooms are sized incorrectly, you may face discomfort, uneven cooling, or overstressed compressors. Proper assessment prevents these issues and lays the foundation for an efficient multi-aircond system.
Choose the Right Type of Aircond for Multi-Room Installations
Choosing the right model for each space becomes even more important when installing multiple airconds. For example, inverter models are ideal for bedrooms and living rooms because they provide quieter operation and long-term electricity savings. Non-inverter airconds, on the other hand, might be suitable for rooms not used frequently.
The brand also matters. Some brands offer multi-split systems where one outdoor unit powers several indoor units. While these systems save space, they may make maintenance more complicated. If the outdoor unit fails, all connected rooms lose cooling. Most Malaysian homeowners prefer separate split units for reliability and simpler servicing.
Think about each room’s purpose. Offices may need units that maintain stable temperatures for long work hours. Kitchens may require models designed to handle heat from cooking. Kids’ rooms may benefit from quiet, energy-efficient units. Multi-aircond planning requires understanding the purpose of each space and matching it to the right type of unit to maximize comfort and energy efficiency.
Plan Indoor Unit Placement for Even Cooling
Indoor unit placement determines how effectively the room cools. When multiple airconds are installed in one home, proper positioning becomes even more important to prevent cold spots, airflow conflicts, or inefficient cooling. For bedrooms, the best placement is usually above the door or on a wall where airflow circulates across the room instead of blowing directly onto people.
For living rooms, installers often place the unit in a central location to distribute cool air evenly. Avoid installing units directly opposite windows with strong sunlight as this can reduce performance. If two airconds are placed close to each other—such as between shared walls—ensure they don’t interfere with each other’s airflow.
Indoor unit placement must also consider piping routes, wiring pathways, and future servicing access. Technicians from JB Cool Care always evaluate the layout to recommend the most efficient and aesthetically pleasing placement. Good planning ensures that each aircond operates efficiently without wasting energy or creating noise.
Plan Outdoor Unit Placement for Multiple Compressors
Outdoor units require even more planning, especially when installing several airconds. A common issue in Malaysia is placing too many outdoor units in one cramped space. When compressors are too close together, they struggle to release heat, leading to reduced cooling performance and higher electricity usage.
Ensure outdoor units have enough ventilation and spacing. Avoid placing them near kitchen exhausts or in fully enclosed areas. For landed homes, place compressors along outdoor walls with enough separation. For condos, follow management rules; some buildings limit the number of compressors per AC ledge.
If you’re installing many units, consider future servicing needs. Outdoor units must be accessible for repairs or gas checks. Installers like JB Cool Care plan compressor arrangements carefully to ensure both performance and ease of maintenance.
Map Out Piping and Wiring Routes
Piping and wiring planning is extremely important in multi-aircond installations. Poorly routed piping can cause leaks, uneven cooling, or noisy operation. When multiple units share the same walls or ceilings, installers must plan to prevent piping overlaps and ensure clean, organized routing.
Pipes should run the shortest distance possible while maintaining proper insulation and avoiding sharp bends. Good piping layout reduces gas pressure drops and improves efficiency. Wiring routes must comply with electrical safety standards, especially when installing several units that draw power simultaneously.
Imagine the difference between a clean, concealed piping job and messy exposed pipes running all over the walls. Planning keeps your home neat and ensures long-term performance. Professional installers always plan piping routes in advance, especially when working with multiple units.
Strengthen Your Electrical System for Multiple Airconds
One of the most common problems in Malaysian homes is circuit overload when too many airconds run on a weak electrical system. Before installing multiple units, check your home’s breaker capacity, wiring quality, and power distribution. For three or more airconds, you may need several dedicated circuits to avoid tripping issues.
Consult with a certified electrician or ask your installer for guidance. JB Cool Care technicians regularly inspect wiring before installation to ensure it can safely support all the units. Proper electrical planning prevents overheating, power fluctuations, and fire risks.
Plan the Drainage System for Each Unit
Airconds produce water during operation, and this water must drain properly. When installing multiple airconds, your drainage plan becomes more complex. Each unit needs a drainage pipe that slopes downward to allow smooth water flow. Improper drainage can lead to water dripping into rooms, creating stains, mould growth, and damage.
Avoid routing several drainage pipes through the same pathway unless done professionally. Consider building rules if you live in an apartment—many condos require drainage to be connected to an internal drainage point instead of dripping outside. Good drainage planning ensures clean and long-lasting installations.
Coordinate Installation Timing and Home Preparation
Installing multiple airconds takes more time, equipment, and manpower than a single-unit job. Coordinate with your installer in advance to schedule the installation properly. Prepare your home by clearing space, protecting furniture, and ensuring access to indoor and outdoor areas.
Good planning allows the installation team to work smoothly without delays. Companies like JB Cool Care provide clear timelines and professional coordination to ensure your installation is completed efficiently.
Conclusion
Installing multiple airconds in Malaysia requires careful planning—from choosing the right units to mapping out wiring, drainage, piping, and outdoor compressor placement. A well-planned installation ensures long-term efficiency, lower electricity bills, and fewer service problems. For reliable multi-unit installations, JB Cool Care offers professional expertise, high-quality workmanship, and full guidance throughout the process. Visit jbcoolcare.com to book your installation today.
FAQs
1. How many airconds can I install safely in my home?
It depends on your electrical capacity and space for outdoor units.
2. Can multiple airconds share one outdoor unit?
Yes, with a multi-split system—but it has advantages and disadvantages.
3. How long does a multi-unit installation take?
Usually 4–8 hours depending on the number of units and complexity.
4. Do I need to upgrade wiring for multiple airconds?
Most homes do for safety and efficiency.
5. Who can help me plan multi-aircond installation?
Visit jbcoolcare.com to get professional help from JB Cool Care.
Please don’t forget to leave a review.
